Basic Info.
Model NO.
Parabolic Trough Solar Concentrator
After-sales Service
Standard
Number of Cells
Ask for Details
Certification
EST, ISO, CE
Specification
12V/24V/48V/72V
Product Description
- EPC Contractor for a 500 MW power plant in Baghdad, Iraq consisting of 10 LM 6000's. Support for the project design of the 500 MW power plant in Baghdad, Iraq, along with the procurement and completed construction of a 500 MW power plant in Al Mussaib, Iraq.
- Supported Trans Alta on the Campeche Combined Cycle Plant in the state of Campeche, Mexico. The plant performance test consisted of Power Island test for the gas turbine, HRSG, and the steam turbine generator; a PTC 46 overall performance test for the facility. This was a 250+MW, 1 x 1 MHI 501F single shaft, combined cycle power plant complete with evaporative cooling on the gas turbines and duct firing in the HRSG's. The plant was dual fuel, gas and #2 fuel oil.
- Consulting for Kvaemer Power E & C in San Ramon, CA for a 1 x 1, GE7FA combined cycle plant. Prepared the project heat and material balances and recommended turn-key performance guarantees to Kvaerner's executive management for their offer to their utility client. It was a first for Kvaerner to offer turn-key guarantees subject to liquidated damages for shortfalls in performance. Kvaerner won the bid.
- Started on-going consulting for a major gas turbine inlet chilling manufacturer and supplier for the preparation of performance comparisons of inlet chilling vs. inlet fogging, evaporative cooling, and no inlet conditioning, water treatment plant.
- Represented the owners of the Pantanal 585 MW, 2 x 1 Siemens V84.3A combined cycle plant in Cuiaba, Brazil on the final performance acceptance test consisting of a heat rate guarantee corrected to 250C and a maximum power output test corrected to 330C.
- Supported Lockwood Greene Engineers, Atlanta, GA on a proposal effort for an 1150 MW combined cycle plant.
- Completed a due diligence study of a 550 MW 2 x 1 combined cycle power plant for Lockwood Greene Engineers, Atlanta, GA. Supported AUS Corp. on the performance of a LM6000 Sprint in simple cycle for a proposal.
- Modeled the Penuelas 507 MW LNG/LPG/#2FO 2 x 1 combined cycle power plant to provide recommendations for part load operations and optimization including a water treatment plant.
- Supported AUS Corp. on their proposal to install a SCR in an existing Rankine Power Plant on the west coast of the United States.
- Continued modeling work for the Penuelas 507 MW LNG/LPG/#2FO 2 x 1 combined cycle plant and solved the low load operational problems and emissions issues. Completed recommendations to solve the low load operational problems and emissions issues for the Penuelas 507 MW LNG/LPG/#2FO 2 x 1 combined cycle plant.
- Supported the Owner of Brazos Valley Energy, LP in Thompson's, TX on the plant performance test consisting of ASME PTC 22 test for the gas turbines, PTC 6 test for the steam turbine generator, and a PTC 46 overall performance test for the facility. This is a 600+MW, 2 x 1 GE 7FA Combined Cycle power plant complete with inlet chilling, water treatment plant on the gas turbines and duct firing in the HRSGs.
- Started support for the Owner of the Gaza Power Plant in the Gaza Strip on the plant performance testing consisting of simple cycle testing of each gas turbine generator and combined cycle testing of two (2) blocks of 2 x 1 Alstom GT10 gas turbines, HRSG's and steam turbine generator.
- Submitted a proposal for re-powering a moth-balled cogeneration plant with a GE LM 2500 DLN gas turbine.
- Submitted a proposal for re-powering a RR Olympus GT CHP facility with GE LM 2500 DLN gas turbines.
- Supported Solar Turbines of Houston, TX on two proposals for cogeneration plants anchored by the Titan gas turbine.
- Contractor for Supported TransAlta on the Chihuahua Combined Cycle Plant in the state of Chihuahua, Mexico for the preparation for the plant performance test consisting of component tests of the gas turbines, HRSG's, and the steam turbine generator, in addition to a PTC 46 overall test. This is a 259 MW, 2 x 1 ABB 11N2 combined cycle plant complete with inlet fogging, duct firing in the HRSG's and an air-cooled condenser. It is a single fuel plant on natural gas.
- Conducted tests on TransAlta on the Chihuahua 259 MW net power plant performance test and plant de-bottlenecking. The plant passed all tests with no penalties. Received QF Status from FERC for a 60 MW net waste fuel to energy plasma gasification power plant for Alabama to convert MSW, sewage sludge & tires to electricity and thermal energy streams.
- Started review of the combined cycle performance test procedures for the Gaza Power Plant. In addition, we prepared Heat & Mass Balances for a 250 MW, 1 x 1 combined cycle power plant in Jordan complete with a water treatment plant.
- Submitted performance calculations and Project Design for a 500 MW power plant in Baghdad, Iraq consisting of 10 LM 6000's, which contract was awarded to our client.
- Continued combined cycle performance test support for the power plant in Gaza Strip. In addition, we supported the design and procurement and construction activities of a 500 MW power plant in Al Mussaib, Iraq.
- Submitted the conceptual design of a cogeneration plant consisting of a gas turbine and HRSG for NRG Energy in Queensland, Australia.
- Started conceptual design comparisons of 2 x 1 GE 7FA and 2 x 1 SW 501 FD combined cycle power plant designs. Models were created for evaporative cooling, steam injection of the gas turbine and duct firing of the HRSG and water treatment plant.
- Completed our performance evaluation of the Gaza Power Plant for simple cycle and combined cycle mode. We completed our work on the Al Mussaib 500 MW LM6000 PC Spring SC plant including a pipeline for oil a refinery to convert crude oil to diesel and a large water treatment plant.
- Prepared calculations to evaluate the power and heat rate of a co-generation plant in New York to improve dispatch for our client.
- Completed calculations for a 650 MW, 2 x 1 combined cycle proposal for California.
Product Description
Product name | Tycorun Solar Powered Generator Power System Home Solar System Off Grid |
Model | Solar Generator systems |
Battery Type | lithium battery |
Rated voltage | 12.8V, 25.6V, 48V, 72V |
Rated capacity | 6Ah@0.2C, 10Ah@0.2C, 20Ah@0.2C, 30Ah@0.2C, 40Ah@0.2C, 50Ah@0.2C, 80Ah@0.2C, 100Ah@0.2C, 150Ah@0.2C, 200Ah@0.2C |
Rated power | 76.8wh, 128wh, 256wh, 384wh, 512wh, 640wh, 1024wh, 1280wh, 1920wh, 5120wh |
Dimensions(LWH) | 90x70x101mm, 151x65x94mm, 181x77x167mm, 198x166x170mm, 229x138x208mm, 256x165x208mm, 328x172x215mm, 483x170x240mm, 521x269x220mm |
Weight | 0.7kg, 1.3kg, 2.6kg, 5kg, 6kg, 10kg, 12kg, 18kg, 21kg |
Charge Voltage | 14.6±0.2V, 29.2±0.2V |
Discharging electricity | 1A, 2A, 4A, 20A, 30A, 100A |
Storage Temperature | 0ºC~45ºC |
Plastic Case | ABS, Metal |
Cycle Life | >2000 Cycles @ 0.2C Charge/Discharge at 100%DOD,End of Life 70% Capacity. |
Months Self Discharge | ≤3.5% per month at 25ºC |
Certifications
TUV,ECE
Address:
672, No. 18, Fukang Road, Changping District, Beijing, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Consumer Electronics, Light Industry & Daily Use, Transportation
Management System Certification:
ISO 9001, ISO 9000, ISO 14000, IATF16949
Company Introduction:
Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
Since its inception, the company has been focusing on and serving the development of the automotive industry, and has many high-quality resources in four major fields: Automotive industry, Internet data processing, national automotive enterprises and universities, to jointly promote the development of the independent automotive industry while providing good services to customers.
We are a professional vehicle and accessories supplier from China. Our products include passenger cars, commercial vehicles, passenger cars, special vehicles, construction machinery and equipment, auto parts, generator sets, etc.
I hope you can contact us when you purchase related products. We can get you any vehicle product you want.